desktopbundle.com

1. Consider the printer’s DPI (dots per inch) capability, which is the resolution at which it can print photos and documents. The higher DPI (dots per inch) you have, the better quality you will have in either text or photo printouts.

2. Consider the cost of ink. When purchasing a new printer, take a moment to compare prices among ink cartridges and make sure that you can afford frequent ink purchases if you plan to do a lot of printing.

3. Take a look at the connector and make sure it’s compatible with your system. Most new printers connect via a USB port. Older ones connect using a parallel port, which is not commonly found on new PCs.

4. When looking at the cost of ink, also look at the number of pages a single ink cartridge can print. If the page count is high, the cost of the ink may be reasonable. If the page count is low compared to other similar ink cartridges, you may want to select another printer that offers a better performing ink cartridge.

5. Check out the warranty. All new electronics, including printers, carry a manufacturer’s warranty. Depending on the company, warranties can be valid anywhere from 90 days to 1 year and may include defects in material and/or workmanship. If your printer fails to perform correctly and develops a problem while under warranty, you will be glad that you saved the paperwork. Always keep the original purchase receipt and warranty information relating to your purchase.

6. Buy from a name that you trust. When shopping for any item, it is best to purchase from a manufacturer that you know produces a quality product and especially when it comes to a substantial electronics purchase.

7. Consider the size and weight of the printer. This is important for both cleaning general convenience. If your desk is small, you may not want a bulky printer taking up most of your space. At the same time, you may not want to lift on a heavy piece of equipment when cleaning your work station. A lightweight and compact style may be better, especially if your office is at home.

8. Make sure that your computer is capable of running the printer software, which means it may require a specific processor type and speed, available memory, etc.

9. Make sure that the printer you purchase has all of the features and capabilities that you need. For instance, if your primary goal is to produce realistic photos and you also plan to print written documents from time to time, consider the purchase of a photo printer. You can change the quality of printing to suit either images or documents or even a combination of both if you plan to print photo newsletters.

10. Make sure that the printer has all of the necessary connector cables and that you will not need to buy any additional hardware prior to finalizing your purchase. If you need to purchase a USB cable, which is often the case with many new printers, you will want to purchase it at the same time to save on shipping if ordering online or having to make a special trip if you purchase locally.

Many people are interested in making the most of their hardware. So here are 10 simple tips on how to make your Windows XP computer run faster without having to purchase additional hardware.

1. Defrag Disk to Speed Up Access to Data

One of the factors that slow the performance of the computer is disk fragmentation. When files are fragmented, the computer must search the hard disk when the file is opened to piece it back together. To speed up the response time, you should monthly run Disk Defragmenter, a Windows utility that defrags and consolidates fragmented files for quicker computer response.

* Follow Start > All Programs > Accessories > System Tools > Disk Defragmenter
* Click the drives you want to defrag and click Analyze
* Click Defragment

2. Detect and Repair Disk Errors

Over time, your hard disk develops bad sectors. Bad sectors slow down hard disk performance and sometimes make data writing difficult or even impossible. To detect and repair disk errors, Windows has a built-in tool called the Error Checking utility. It’ll search the hard disk for bad sectors and system errors and repair them for faster performance.

* Follow Start > My Computer
* In My Computer right-click the hard disk you want to scan and click Properties
* Click the Tools tab
* Click Check Now
* Select the Scan for and attempt recovery of bad sectors check box
* Click Start

3. Disable Indexing Services

Indexing Services is a little application that uses a lot of CPU. By indexing and updating lists of all the files on the computer, it helps you to do a search for something faster as it scans the index list. But if you know where your files are, you can disable this system service. It won’t do any harm to you machine, whether you search often or not very often.

* Go to Start
* Click Settings
* Click Control Panel
* Double-click Add/Remove Programs
* Click the Add/Remove Window Components
* Uncheck the Indexing services
* Click Next

4. Optimize Display Settings

Windows XP is a looker. But it costs you system resources that are used to display all the visual items and effects. Windows looks fine if you disable most of the settings and leave the following:

* Show shadows under menus
* Show shadows under mouse pointer
* Show translucent selection rectangle
* Use drop shadows for icons labels on the desktop
* Use visual styles on windows and buttons

6. Disable Performance Counters

Windows XP has a performance monitor utility which monitors several areas of your PC’s performance. These utilities take up system resources so disabling is a good idea.

* Download and install the Extensible Performance Counter List (http://www.microsoft.com/windows2000/techinfo/reskit/tools/existing/exctrlst-o.asp)
* Then select each counter in turn in the ‘Extensible performance counters’ window and clear the ‘performance counters enabled’ checkbox at the bottom button below

7. Optimize Your Pagefile

You can optimize your pagefile. Setting a fixed size to your pagefile saves the operating system from the need to resize the pagefile.

* Right click on My Computer and select Properties
* Select the Advanced tab
* Under Performance choose the Settings button
* Select the Advanced tab again and under Virtual Memory select Change

* Highlight the drive containing your page file and make the initial Size of the file the same as the Maximum Size of the file.

8. Remove Fonts for Speed

Fonts, especially TrueType fonts, use quite a bit of system resources. For optimal performance, trim your fonts down to just those that you need to use on a daily basis and fonts that applications may require.

* Open Control Panel
* Open Fonts folder
* Move fonts you don’t need to a temporary directory (e.g. C:\FONTBKUP?) just in case you need or want to bring a few of them back. The more fonts you uninstall, the more system resources you will gain.

9. Use a Flash Memory to Boost Performance

To improve performance, you need to install additional RAM memory. It’ll let you boot your OS much quicker and run many applications and access data quicker. There is no easiest and more technically elegant way to do it than use eBoostr (http://www.eboostr.com).

eBoostr is a little program that lets you improve a performance of any computer, powered by Windows XP in much the same way as Vista’s ReadyBoost. With eBoostr, if you have a flash drive, such as a USB flash thumb drive or an SD card, you can use it to make your computer run better. Simply plug in a flash drive through a USB socket and Windows XP will use eBoostr to utilize the flash memory to improve performance.

The product shows the best results for frequently used applications and data, which becomes a great feature for people who are using office programs, graphics applications or developer tools. It’ll surely attract a special attention of laptop owners as laptop upgrade is usually more complicated and laptop hard drives are by definition slower than those of desktops.

10. Perform a Boot Defragment

There’s a simple way to speed up XP startup: make your system do a boot defragment, which will put all the boot files next to one another on your hard disk. When boot files are in close proximity to one another, your system will start faster.

On most systems, boot defragment should be enabled by default, but it might not be on yours, or it might have been changed inadvertently. To make sure that boot defragment is enabled:

* Run the Registry Editor
* Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Dfrg\BootOptimizeFunction
* Set the Enable string value to Y if it is not already set to Y.
* Exit the Registry
* Reboot

Getting a new computer should be a cool thing, especially a cheap computer. After all that time struggling with you old machine, probably fighting with it to get the latest software to run, your new computer should be a ray of light for your computing future.

Oh, if it were that simple. If things were really that easy or simple when buying a cheap computer, life would be much easier, but just like every other thing, its not that simple.

Barebones computers have become extremely popular, and for good reason. Getting a barebones computer which does not include a monitor and comes with the bear minimum of parts makes them an upgradable, practical and cheap computer.

But not all things are rosy in barebones computer land…

1. Missing parts

Although barebones computers do come with the essential pieces, most people need at least one or two extras for their day to day barebones system. This is simply due to different applications people use them for. Don’t get caught missing that extra part from your barebones system that you then need to get later. You still need to do some homework and research to find out what you really need from your barebones system.

2. Super cheap computer deals

Beware, many corners can be cut to get those sub $200 dollar barebones systems. They can be great, but not always, carefully analyse the components of the package. Also remember that a barebones system couldn’t possibly include a monitor for that price, which adds a lot to the price.

3. Mismatched parts

This could become a problem if building your own computer, but it even happens in pre-assembled barebones computer deals. There is a chance that you get something that doesn’t fit with the barebones system. There are lots of different connections and speed ratings between parts. Make sure the ones you get match up to the other parts and your needs. Although not common, incompatibilities between parts are not unheard of.

4. Outdated components

To get super-cheap deals older parts are sometimes used in cheap computers. Although this can be a great cost-saver and some old parts are fantastic, there is nearly no chance of an upgrade without putting a major amount of money into your barebones computer again, perhaps as much if not probably more than you paid for your great deal.

5. Defective parts

Although this is another one that has gotten better as the competition has gotten stronger, there is a chance of defects in cheaper products. Your motherboard could be faulty, your power supply might give up after a month or two. These may not be intentional problems, but come hand in hand with “cheap computer stuff”.

6.Refurbished computer parts

Refurbished computer parts are a great way to save some money. Not always the biggest saver, but there can be problems with the updates to these computers in much the way as mismatches happen in barebones systems. Often the computer is slightly updated to meet needs, but is really quite an old model, just with upgrades. Can be fine, but the parts they replace might be replaced with something newer but inferior.

7. Claims of great warranty

To try and entice you into feeling safe, offers of long warranties are made. Most of the parts in the computer could have past their warranty dates, so the warranties are purely from the company that put the computer together. They can be hard to contact and take their time to get replacements to you as well as expect you to mail the computer to them so that they can do the repairs.

Barebones computers can be a great way to put together a second computer, build a computer for simple purposes, like writing documents and casual web surfing. Barebones fit perfectly as a second computer. Just keep these things in mind and you won’t get bitten by the bargain bin monster.